PE100 PN16 Umbhobho weHDPE Odityanisiweyo Welded Fabrication 30/45/60 Degree Y Tee Butt-Welding HDPE Fittings Featured Image Featured

PE100 PN16 Umbhobho we-HDPE oWelded Fabricated 30/45/60 Degree Y Tee Butt-Welding HDPE Fittings

Inkcazelo emfutshane:

1. Igama:HDPE Fabricated 30/45/60 Degree Y Tee

2. Ubungakanani:110-1200mm

3.Uxinzelelo :I-PN6-PN16

4.Umgangatho:ISO4427, EN12201/ ISO4437, EN1555.

5. Ukupakisha:Woodencase,iibhokisi okanye iingxowa.

6. Uhlolo:Ukuhlolwa kwezinto ezikrwada.Ukuhlolwa kwemveliso egqityiweyo.Ukuhlolwa komntu wesithathu kwisicelo sabathengi.

Thumela i-imeyile kuthi Thumela i-imeyile

Iinkcukacha zeMveliso

Inkcazo

Iziqinisekiso

Iithegi zeMveliso

Iinkcukacha zolwazi

Umsebenzi kaCHUANGRONG ubonelela abathengi abahlukeneyo ngesisombululo esigqibeleleyo sokumisa esinye senkqubo yombhobho weplastiki.Inokubonelela ngenkonzo eyilwe ngobungcali, eyenzelwe iprojekthi yakho.

HDPE Fabricated joint yindlela kwidayamitha enkulu polyethylene uxinzelelo lwemibhobho iinkqubo.I-Segmented Joint lukhetho lokuqala kwii-diameters ezinkulu ezifanelekileyo.Umbhobho okumgangatho ophezulu kunye nendlela yokuwelda efanelekileyo yeyona nto ibalulekileyo ukuqinisekisa uzinzo, ukufana, kunye namandla afunekayo.

Izixhobo zeNdibano Ngokukwazi kwayo ukufumana ii-angles ezingezona zendabuko, izixhobo ezenziweyo zihlala zisetyenziselwa kwi-630mm kunye nezicelo ezinkulu apho izixhobo ezibunjiweyo zingenakusetyenziswa.Ukukwazi ukusebenzisa iiseli ezikhethekileyo zokudibanisa ukwenza oomatshini kunye nokuvelisa, ukuguquguquka kwayo kuvumela ukudala kanye oko kufunwa ngabathengi.

Kubalulekile ukwazi ukuba izifakelo ze-HDPE ezenziwe ngemibhobho ye-HDPE ziya kuba noxinzelelo olucuthiweyo.Uxinzelelo oluphezulu oluvumelekileyo olusebenzayo luya kuncitshiswa xa izixhobo ezenziweyo zincanyathiselwe kumbhobho, kwaye iijiyometri ezahlukeneyo ze-PE zifakela izinto ezahlukeneyo zokunciphisa.

HDPE Fabricated Fittings 30/45/60 Degree Y Tee Butt-Welding HDPE Fittings

Iintlobo	Inkcazo	Ububanzi (mm)	Uxinzelelo
HDPE Fabricated Segments Fittings	Ingqiniba: 11.25˚ 22.5 ˚ 30˚ 45˚ 90˚	DN110-1800mm	I-PN6-PN16
	Equal Tee	DN110-1600mm	I-PN6-PN16
	Ukunciphisa iTee	DN110-1600mm	I-PN6-PN16
	I-Lateral Tee(45 deg Y Tee)	DN110-1200mm	I-PN6-PN16
	Umnqamlezo	DN110-1200mm	I-PN6-PN16
	Ukunciphisa uMnqamlezo	DN110-1200mm	I-PN6-PN16

Wamkelekile ukuba undwendwele umzi-mveliso wethu okanye wenze uphicotho lomntu wesithathu.

Wamkelekile ukuba uqhagamshelane nathi ngeenkcukacha zeemveliso kunye nenkonzo yobungcali.

Nceda uthumele i-imeyile ku:chuangrong@cdchuangrong.com

Ingcaciso yeMveliso

Ukufakelwa kwemibhobho ye-HDPE, ebizwa ngokuba yi-polyethylene fittings okanye i-poly fittings, isetyenziselwa ukudibanisa iinkqubo zemibhobho ye-HDPE.Ngokubanzi, izifakelo zemibhobho ye-HDPE ziyafumaneka kuhlengahlengiso oluqhelekileyo lwee-couplers, iitee, izinciphisi, iingqiniba, ii-stub flanges & saddles., njl.

Izixhobo zombhobho we-HDPE, ezenziwe ngezinto ezisemgangathweni ophezulu, zikhetho ezifanelekileyo zokudityaniswa kombhobho we-HDPE owenziwe sithi.Ufakelo lwemibhobho ye-HDPE inokubonelelwa kwiindidi ezahlukeneyo, ezibandakanya ukufakwa kwe-butt fusion, izixhobo zokufakelwa kwe-electrofusion, ukufakwa okwenziweyo kunye nokufakwa koxinzelelo lwePP.

I-HDPE i-Welded Pipe Fittings: I-elbow (i-11.5 degree, i-22.5 degree, i-30 degree, i-45 degree, i-60 degree, i-75 degree, i-90 degree elbow, njl. njl. i-angle ingenziwa ngokwezifiso).I-Tee, i-oblique tee, i-Y-type tee, umnqamlezo, kunye nezinye izifakelo zombhobho ezilungiselelwe iimilo ezahlukeneyo ezidingwa ngabathengi xa kusakhiwa.Zonke ezi zifakelo ezenziweyo zenziwe kwaye zivavanywe ngokuhambelana ne-ASTM 2206 - "Inkcazo eMiselweyo yeeFabricated Fittings of Welded Polyethylene Plastic Pipe."ngokuhambelana ne-ISO 4427, EN12201, ISO 14001,ISO 9001,AS/NZS 4129 PE Fittings, imigangatho ye-ISO4437 njl. Ukususela kubukhulu be-OD50 ukuya kwi-1200mm.

Igama	HDPE Fabricated Fittings
Izinto eziphathekayo	PE100 / PE80
Ububanzi	DN90-DN1200
Umbala	Mnyama, Grey, Orange, Customized
Uhlobo	Ngokuthe tye, 90° ingqiniba, 45° ingqiniba, flange, end cap, elinganayo tee, reducer straight, reduceing tee etc.
Uxinzelelo	Pn10, Pn12.5, Pn16, Pn20
Umgangatho	I-GB/T 13663.3-2018, ISO 4427, EN 12201
Ubushushu	-20°C ~ 40 °C
Isicelo	Ubonelelo ngerhasi, uBonelelo lwaManzi, uGutyulo, ukucocwa koGutyulo, iMibhobho yoMgodi kunye noLudaka, ukunkcenkceshela, njl.
Iphakheji	Ikhathoni, iPolybag, Ibhokisi yoMbala okanye eyenzelwe wena
OEM	Iyafumaneka
Qhagamshela	I-Butfusion Welding, i-Flanged Joint

I-CHUANGRONG ineqela labasebenzi elibalaseleyo elinamava atyebileyo.Inqununu yayo yiMfezeko, iProfessional and Efficient.Iseke ubudlelwane boshishino namazwe angaphezu kwama-80 kunye nemimandla kushishino olunxulumeneyo.Ezinje ngeUnited States, Chile, Guyana, United Arab Emirates, Saudi Arabia, Indonesia, Malaysia, Bangladesh, Mongolia, Russia, Afrika njalo njalo.

Wamkelekile ukuba uqhagamshelane nathi ngeenkcukacha zeemveliso kunye nenkonzo yobungcali.

Nceda uthumele i-imeyile ku: chuangrong@cdchuangrong.com okanye uMnxeba: + 86-28-84319855

Ngaphambili: Uyilo oluKhethekileyo PE100 Fabricated Cross Fitting PE Pipe Segment Welded Cross Butt Fusion Fitting

Okulandelayo:

HDPE Fabricated Fittings 30/45/60 Degree Y Tee Butt-Welding HDPE Fittings

iinkcukacha	L1 mm	L2 mm	L mm
			θ=45°	θ=60°
225	180	500	999	940
250	200	500	1054	989
280	220	500	1116	1043
315	240	500	1186	1104
355	240	500	1242	1150
400	270	500	1336	1232
450	300	500	1437	1627
500	320	650	1678	1548
560	350	650	1792	1647
630	400	650	1941	1777

Wamkelekile ukuba uqhagamshelane nathi ngeenkcukacha zeemveliso kunye nenkonzo yobungcali.

Nceda uthumele i-imeyileukuya: chuangrong@cdchuangrong.com okanye uMnxeba: + 86-28-84319855

I-CHUANGRONG ineendlela zokubona ezipheleleyo kunye nazo zonke iintlobo zezixhobo zokukhangela eziphambili zokuqinisekisa ulawulo lomgangatho kuzo zonke iinkqubo ukusuka kwimathiriyeli ekrwada ukuya kwimveliso egqityiweyo.Iimveliso zihambelana ne-ISO4427/4437, ASTMD3035, EN12201/1555, DIN8074, AS/NIS4130 standard, kwaye ivunywe yi-ISO9001-2015, CE, BV, SGS, WRAS.